Commercial and multifamily
The plant-room unit for large buildings.
The ecoGEO+ HP makes heating, cooling and hot water for apartment buildings, schools, hotels and industry. It works in simultaneous consumption or simultaneous production, and up to six units form a cascade of 150 tons.
What it does.
Heating
From 50 to 300 MBH per unit.
Cooling
Passive and active.
Hot water
Up to 149 °F, and up to 167 °F with HTR.
Simultaneous heat and cold
Makes both at the same time and moves energy between them.
What is inside.
- Variable-speed compressorFrom 25 to 100% of capacity.
- Passive cooling controlExternal, for the ground loop.
- HTRHigh-temperature hot water.
- Simultaneous controlHeat and cold, with a hot and a cold tank.
- e-sourceManages up to three sources, including dry coolers.
- Controls and EasynetThe unit is the controller of the plant room.
Key data.
- Capacity
- 50 to 240 MBH and 70 to 300 MBH (about 20 and 25 tons)
- Modulation
- 25 to 100%
- Power
- Three phase 400 to 480 V, and also three phase 208 to 230 V
- Size
- 42.3 x 34.6 x 31.1 in (117), 42.3 x 39.7 x 36.1 in (170)
- Refrigerant
- R454B
- Cascade
- Up to 6 units, 150 tons, with the Supervisor above 3 units
The 25-ton unit is available in three phase 208 to 230 V.
Commercial and industrialMultifamilyWith dry coolers
Draft Data comes from the 2026 product sheets and is confirmed with engineering before it is published.
Planning a project?
Send the plans or the loads. Ecoforest’s technical office reviews the design at no cost.