Multifamily
A small unit in every apartment, or one plant room for the whole building. No ducts, no equipment on the roof, and every resident controls their own hot water.
Explore multifamilyOne platform for every building.
ecoGEO+ heat pumps with a variable-speed compressor make heating, cooling and hot water up to 149 °F. In an apartment tower or in a winery, the unit follows the demand.
The same technology in every building.
Variable speed
The compressor modulates continuously, so the plant follows the demand instead of switching on and off.
Heat, cold and hot water
One unit makes heating, cooling and domestic hot water at 149 °F on demand, and up to 167 °F with HTR.
Controls built in
The unit is the controller of the plant room, with no external controllers.
Any source
Ground loops, dry coolers or both, chosen automatically.
It runs as slow as the building allows.
A staged machine jumps between fixed steps and produces more than the building needs. An Ecoforest inverter compressor follows the demand, from 20 to 100% of its capacity, so it rarely switches on and off.
- Building demand
- Staged machine
- Ecoforest variable speed
0:00
Illustrative model of one day, not a measurement. The staged machine has two steps, 50 and 100%.
The heat pump runs the whole plant room.
Ecoforest writes its own control software. The unit commands the pumps, the valves, the tanks and the sources, and it talks to the cloud, so there is no external controller to program. Pick a part to see what the unit does with it.
ecoGEO+Controller and software
Choose your building.
Commercial and industrial
One central plant for wineries, factories, offices, hotels, gyms and large homes. It serves heating and cooling in turn, or at the same time.
Explore commercial and industrialWhat are you building?
Tell us about your building.
Send the plans or the loads. We will come back with the units, the schematic and the heat source.
Request a preliminary scope.